Category

Electric Contact Spray

Description

The electronic spray is full synthetic contact spray which is compatible with plastics and formulated for use on vehicle electric and electrical system. The electronic spray contains no silicones or mineral, animal or vegetable oils.

Benefits

• Clean Contaminated contacts.
• Protects against corrosion.
• Displaces moisture and water.
• Penetrates layers of oxides and sulfides
• Reduces contact resistance.

Does not contain silicones.

 

Application

Used for the care and maintenance (cleaning and protection) of all electrical components on the motor vehicle such as plug and terminal connections, lamp socket cable distribution boxes, switch elements, relays ignition distributors, contact breaker starters, dynamos/alternators, fuses battery terminals and antennae and for the lubrication of fine mechanical components.

 

Instructions

Switch of the current inline. Spray components with electronic spray before I install them. If the Contacts are heavily corroded, allow the product to act for longer and rub off corrosion reduces with a cloth brush.

Note:- After spraying on allowing a flash-off period of 10 minutes before connecting the component to a power supply.

 

Caution

Pressurized & Inflammable. Do not puncture, the heat or incinerate. Store below 50 C away source of heat, sunlight, and ignition. Do not spray on the flame of ignited materials. Use extensions tube for pinpoint application. Use well-ventilated area, Avoid excessive inhalation, eye, or skin contact. Keep Away from children.

Disposal of used can

Aerosol cans are for a single-time use only. After use, it is advisable to empty out the contents completely and ensure no pressure remains inside. Such empty can may be crushed to avoid refilling. Dispose of the crushed can as per government regulations.